Hi Tech Radiators 166 Boniface St Archerfield Brisbane 4108 Queensland Australia Ph: 61 07 3277 7087  Fax:61 07 3276 75877587
 E-mail

Mining

Call Nat 61 State 07 3277 7087

see what we are doing now on  facebook

Asia pacfic - Hi Tech Radiators for Mining Vehicle Industry Radiators, Heat exchanges,
Intercoolers and Oil coolers

Hi Tech Radiators servicing the Mining Industry nationally and Internationally.

                                 

For Sale

RADIATOR : Hitachi Zaxis 330-3

O/E PART NUMBER:

MAKE: Hitachi Zaxis

MODEL:  330-3

YEAR:

Overall size: (A)1209mm x (B)445mm

CORE SIZE: 1033mm x 445mm x 114mm

ENGINE:

NOTES: O/E TRD1361-618-1001-A EARTHMOVING

HI-TECH PART NUMBER: HT-188330-3


Radiator: Caterpillar 330c excavator

O/E PART NUMBER: 193-2709

MAKE: Caterpillar

MODEL: 330C Excavator

CORE SIZE: (A)1050mm x (B)830mm x 60mm

OVERALL SIZES: 1210mm x  900mm

YEAR:

Man,P/N: 2302817he00000-1090-441-0000-a

HT PART NUMBER: HT-183330C

NOTES:  spout sizes 50mm  Top and bottom spouts right hand side  EARTHMOVING


Hydraulic Oil cooler: IHI 55J Excavator Hydraulic Oil Cooler

O/E Part Number:

Make:  IHI

Model:  55J

Year:

Core Size: (A)420mm x (B)520mm

Overall Size:  510mm x 545mm x30mm

Engine: Isuzu 51HP Water cooled diesel engine

Notes:  Replacement Part No:Con-ADB5585 EARTHMOVING

Hi-Tech Part Number: HT-OCO98955J


Oil cooler: Komatsu O Swing

O/E Part Number:

        Picture not available

Make:  Komatsu

Model:PC228UU-PC228US Zero Swing

Year:

Core Size: (A)830mm x (B)740mm

Overall Size:  950mm x 780mm

Engine

Notes:  top pad fitting runs along top tank., bottom pad fitting is on a 45digre angle both 110mm long EARTHMOVING

Hi-Tech Part Number: HT-15110


RADIATOR/OILCOOLER : Takeuchi

O/E PART NUMBER:

MAKE: Takeuchi 

MODEL:  180TB Excavator

YEAR:

CORE SIZE: (A)490mm x (B)631mmx 115mm

ENGINE:

OVERALL SIZE: 580MM X 631MM X 115MM

NOTES: Oil Cooler and Radiator in one / combi cooler Manufacture: O/E 3853-035-1000 EARTHMOVING

HI-TECH PART NUMBER: HT-1820


Radiator: Kawasaki 70Z4 loader

O/E Part Number: 70J1-1068

Make:  Kawasaki

Model:  70Z4

Year:

Core Size: (A)875mm x (B)700mm x 100

Overall Size: 1106mm x 700mm

Engine: Genuine Kawasaki

Notes: Can build complete or recore EARTHMOVING

Hi-Tech Part Number: HT-181170Z


HYDRAULIC OILCOOLER: JCB-JS220

O/E PART NUMBER:

MAKE: JCB

MODEL: JS220 Excavator

CORE SIZE: (A)851MM X (B)405MM

OVERALL SIZES: 991MM X 405MM X 140MM

HT PART NUMBER: HT-OCO1032JS220

NOTES: 1611540                   EARTHMOVING

Atlas Copco GA110 Compressor Oilcooler
Overall measurments:-
1055mm High x 658mm Wide x 140mm thick
Hitachi EX3500 Excavator Hydraulic Oilcooler
Heavy duty aluminium plate and bar construction
Overall sizes:-
1600mm High x 1565mm Wide x 120mm thick
nly stocked on the shelf for you.
Hitachi EX3600 Excavator Hydraulic Oil Cooler
Heavy Duty Aluminium Plate and bar construction
Overall sizes:-
1610mm High x 1385mm Wide x 120mm thick
1x Flange top and bottom tank
Hitachi EX5500 Excavator Hydraulic Oilcooler
Heavy Duty Plate and Bar Construction
Overall sizes:-
1730mm High x 1580mm Wide x 120mm Thick
2x Flanges on top and bottom tank
Atlas Copco XRVS Compressor Oilcooler
Heavy Duty Plate and Bar Construction
Overall Size:-
1505mm High x 805mm Wide x 115mm Thick

HITACHI EX5500  POA
  HITACHI EX5500 EXCHANGE BASIS OR A $2000 CORE DEPOSIT WILL APPLY Application: EXCAVATORHYDRAULIC OIL COOLER Description: HEAVY DUTY ALUMINIUMPLATE AD BAR CONSTRUCTION,KOIL COATED FOR EXTRA PROTECTION IN HARSH ENVIRONMENTS,2 XPAD FITTING EITHER END OF THE OIL COOLER

Size : 1730 MM X 1580MM X 120MM 
 
 
HITACHI EX1800  POA
  HITACHI EX1800/EX1900/EX2500 EX3600-EX5500 TRANSMISSION OIL COOLER/ TROPICAL PACK. EXCHANGE BASIS ASSEMBLY HEAVY DUTY ALUMINIUMPLATE AND BAR CONSTRUCTION Core Dimensions 275mm x 355mm x 50mm

Size : 375MM X 385MM X 50MM 
 

Sumitomo  POA
  EXCHANGE BASIS OR A $1000 CORE DEPOSIT WILL APPLY. Heavy Duty Brass Fin and Brass Tank Construction.

Size : CORE 810 MM X 750MM X 64MM
Category : Heavy Machinery Sumitomo
Product Code : HISH2003 
 

Caterpillar 785C Complete Radiator assembly

Aftermarket - Open fin pitch - .2mm thick steel fin with hemmed edge for extra strength
Rust proof protected paint on both core and steel work
Radiator completely built and ready to dispatch straight away
Main advantage

The original equipment - folded core sections that come out in these particular radiator assemblies have a very close mesh fin pitch at 21 fins per inch as compared to our core at 9 fins per inch allowing for ease of cleaning and less chance of major blockage.

Note: Exchange basis , needs to be sent with in two weeks to allow Hi-Tech to build another with out holding up other orders.
Core Specifications

- 152mm thick - 8 row cantered tube - 6 thou copper fin - 10 thou wall welded tube - 3mm main header plates with 2mm full sub header - High tensile zinc nuts, bolts and washers

Caterpillar D11R Complete Mesabi Radiator

The mesabi is a more efficent set up and also helps to stop the build up of dirt and rubbish that may be floating around on site, it is a great option for people in remote areas who cant allow weeks of down time and can replace a damaged tube them selves.

This radiator has a high gloss cat yellow epoxy finish which helps to protect the steel work in any sort of weather and can also be sent with a stand to have it up right for easy storage and mobility.
This item is exchange basis so we can keep these constanly stocked on the shelf for you.


Oilcooler suit a Caterpillar 815 and 825 compactor.
Heavy duty plate and bar aluminium construction which is far more superior then the original tube and fin style due to
turbulator inside tubes allowing maximum heat transfer time in front of cooling fan and far more robust for hot and cold
expansion allowing tubes not too crack and split at the headerplate
.
Overall sizes are 1170mm tank to tank 650mm wide and 40mm thick.

Radiator and Aftercooler assembly to suit Caterpillar 777A dump truck
Item: Recored Radiator and Aftercooler assembly to suit Caterpillar 777A dump truck. Fully recored unit with tanks
sandblasted and all steel work inspected for corrosion, pitting and cracks. Then fully red oxide prime coated before
being painted in Caterpillar yellow with a hardener too strengthen coating. All reo bars tapped out with new pressure
relief valves on tanks and assemebled to brand new Australian made cores with high tensile zinc grade nuts and bolts
with genuine gaskets and pressure relief valves. Both units pressure tested and assembled together ready for transport
anywhere in Australia.

* 12 month warranty
* Special Hardened Paint Job
* Heavy Duty Brass Core - Non Corrosive Fin
* Heavy Duty Tube Thickness
* Can Send New Unit Straight Away While Machine Is Still Running Mkaing Very LIttle Down Time.

$15705.25 + gst ( Radiator + Aftercooler )

NOTE: Items are exchange basis only other wise a $2500core deposit will apply if old units are not sent back with in
2 weeks at customers expense.


http://radiator-core-manufacturer.com.au/


 

PHONE: 3277 7087   FAX: 3276 7587

HI-TECH RADIATORS
166 Boniface St
Archerfield Qld 4108
Site Hosted by Globalconnective. E-commerce by Globalconnective.


http://radiator-additives.com.au/
http://www.oil-coolers-australia.com.au/
http://car-truck-air-conditioning-brisbane.com.au/
http://www.caterpillar-radiators.com.au/

www.high-performance-radiators.com.au
http://reconditioned-radiators-australia.com.au/
www.motorbike-radiators.com.au
www.radiator-fabrication.com.au
www.car-radiators.com.au
www.truck-radiators.com.au
www.aluminium-welding.com.au


http://www.car-radiators-brisbane.com.au/
http://www.radiator-core-manufacturer.com.au
http://www.industrial-radiators.com.au/
http://www.ultrasonic-cleaning-australia.com.au/
http://www.intercoolers-brisbane-australia.com.au/

http://www.radiators-mechanics-ipswich.com.au/
http://www.melbourne-radiators.com.au/truck-radiators.htm